[Tigers] Hardtop B-pillar details
Gary Winblad
garywinblad at comcast.net
Sat Feb 10 17:28:55 MST 2018
Graham,
Window weatherstrip under the polished metal.
The thin side window weatherstrip is just held by its beaded rubber edge
by the stainless
trim that's held on by the screws. No glue anywhere.
Gary
On 2/10/2018 2:34 PM, Graham Harlowe via Tigers wrote:
> Listers -
>
> I'm reassembling a hardtop and can't remember how the B-pillar is
> configured. Does the thin polished stainless angle piece get tucked into
> the quarter window weatherstrip, or does the quarter window weatherstrip get
> tucked inside the stainless piece? I don't remember which one was on top of
> the other, as viewed from the interior. A photo of the B-pillar from the
> interior may be helpful.
>
> Also, there's narrow, vertical piece of weatherstrip that runs between the
> stainless angle and the hardtop B-pillar. Is that weatherstrip typically
> glued into place, or is that held in place merely by being squeezed by the
> 6-20 screws?
>
> BTW, thank you for the responses regarding the headliner bow sleeves.
> Trimming them helped fit the headliner.
>
> All the best,
>
> Graham Harlowe
> B382001466
>
>
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net
>
>
More information about the Tigers
mailing list