[Tigers] Brake/Clutch Pedal Return Springs

[coolvt at aol.com]

Joe, 


Don't think a washer will work. The cup portion of the piece you are describing fits down into the spring and prevents it from sliding off the spring..  A flat washer will eventually work it's way off the spring. This should be a part that appeared on other British cars. Someone must know of a source. Mark L
In a message dated 8/9/2018 9:57:10 PM Eastern Standard Time, tigers at autox.team.net writes:

 
I have two questions about installing the brake and clutch pedals.  
 
1. I have two springs and one of them is a little larger than the other.  Does the larger one go with the brake pedal?  
 
2. According to the repair manual there should be a sort of cupped shape circular piece of metal that goes over the master cylinder rods so that the springs can ride against the pedals.  I can't find these anywhere in my boxes of stuff and the usual Sunbeam suppliers do not carry them.  Does anybody know of a source for these things?  It looks like I can just cut a slot in a big washer and make that work.
 
Thanks,
Joe Brown
_______________________________________________


tigers at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/tigers

Unsubscribe: http://autox.team.net/mailman/options/tigers/coolvt@aol.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20180809/6657c2b3/attachment.html>