[Tigers] Valve Cover Sticker Removal?

Randall Antosiak randya at pacbell.net
Thu Aug 9 13:08:41 MDT 2018


Thanks to all who responded to my request about info to remove the valve cover sticker.  I was able to remove the sticker using 3M Adhesive Remover and some delicately applied elbow grease.  The process to remove the sticker is iterative, spray a little adhesive remover, and gently pry up the sticker with a razor blade  This process leaves small marks on the sticker, which are not noticeable except on close inspection.  To avoid marking the sticker, I think there is probably a better approach, such as soaking sticker in adhesive remover.
BTW, installing the sticker requires high temp adhesive.  I'm planning on using DEI High Temp Adhesive.
Pics - before pic with sticker in place, and pics of removed sticker in different lighting.











-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20180809/822c7635/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Before - Doc Size.jpg
Type: image/jpeg
Size: 443433 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20180809/822c7635/attachment-0003.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20180809_115353-Doc Size.jpg
Type: image/jpeg
Size: 240406 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20180809/822c7635/attachment-0004.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20180809_115227-Doc Size.jpg
Type: image/jpeg
Size: 234898 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20180809/822c7635/attachment-0005.jpg>


More information about the Tigers mailing list