[Tigers] Fw: Overheating

[Gary]

Ditto on David's comments.
Cooling openings at rear of block
https://www.google.com/search?q=ford+289+head+gasket&tbm=isch&source=iu&ictx=1&fir=RMOMMk1QHGWYxM%253A%252CSxxen8CYlo5ClM%252C_&usg=__tuNxeQEN8ENH1hfS7V2W9SzWlM0%3D&sa=X&ved=0ahUKEwjpiYXcl87aAhVPyWMKHRa0BAgQ9QEIfDAF#imgrc=RMOMMk1QHGWYxM:&spf=1524410522839
Gasket installed correctly

https://www.google.com/search?q=ford+289+head+gasket&tbm=isch&source=iu&ictx=1&fir=RMOMMk1QHGWYxM%253A%252CSxxen8CYlo5ClM%252C_&usg=__tuNxeQEN8ENH1hfS7V2W9SzWlM0%3D&sa=X&ved=0ahUKEwjpiYXcl87aAhVPyWMKHRa0BAgQ9QEIfDAF#imgrc=A0-Ag7mZEwQoUM:&spf=15244105228392839
      From: D or G at sbc via Tigers <tigers at autox.team.net>
 To: Joel Martin <jmartiniii at yahoo.com>; Tiger List Serve <tigers at autox.team.net> 
 Sent: Sunday, April 22, 2018 9:17 AM
 Subject: Re: [Tigers] Fw: Overheating
   
Here is a reply from another forum thread on head gaskets backwards.
David Franchi
-----------------------

Check the gasket corner by the front lower head bolt on the forward side of the 
head. There should be a square corner protruding 1/4 inch from under the head that can be seen or felt easily. (Some alum heads cover it but it can be seen or felt from the block side)

If you see the corner the gasket is correct. The rear end of the gasket does NOT have a corner. Compare new gaskets at the parts store, turn one backwards and look. I believe that the FelPro gaskets DO have the corner.

Caution, I have seen some hp gaskets that did not have the square corner.

Go buy a NEW radiator cap and make the parts store get out their pressure tester and make sure the new cap holds pressure. Most caps test 2-4 pounds less than their rating. I just bought a brand name one and we had to test 4 to get one to test more than 12 on a 16 rating.... finally 
got a 15 1/2.

Photo link
http://sbftech.com/index.php?PHPSESSID=4f2b198aad3d85f8fb74d7b6eeeccd78&action=dlattach;topic=464.0;attach=463;image

-----------------------------




________________________________
_______________________________________________

tigers at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/tigers/maliburevue@yahoo.com




   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20180422/8184b138/attachment.html>