[Tigers] Tiger Convertible top

e.coiner e.coiner e.coiner at cox.net
Sat Apr 7 14:37:28 MDT 2018


screws.  You need to be able to adjust the tension and tug the fabric to adjust tension and wrinkles. When everything is just right you snug the screws down tight.  

> On April 7, 2018 at 10:01 AM Joel Martin via Tigers <tigers at autox.team.net> wrote:
> 
>     Hello all
>     In process of installation of convertible top.  The rear of the top fabric is held by a finisher strip attached to the rear shelf I believe.  These are held by pop rivets or screws???
> 
>     If pop rivets are these correct for 66 MK 1A?
> 
>            1. Aluminum rivets (1/8″ diameter, grip range 1/8″. About 15 or less required)
> 
> 
> 
>     Thanks
>     Joel Martin
> 


 

> _______________________________________________
> 
>     tigers at autox.team.net
> 
>     Donate: http://www.team.net/donate.html
>     Archive: http://www.team.net/archive
>     Forums: http://www.team.net/forums
>     Unsubscribe: http://autox.team.net/mailman/options/tigers/e.coiner@cox.net
> 
> 
> 


 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20180407/c3fc436e/attachment.html>


More information about the Tigers mailing list