[Tigers] Caliper bolts to stainless Grade 8

[Smit, Theo]

Common stainless bolts are approximately equivalent to cheese. Maybe try these guys? http://lightningboltandsupply.com/stainless-steel.html

What I would do is to use quality regular grade 8 fasteners, and find a high temperature clearcoat or silver for the whole assembly.
Cheers,
Theo

From: Tigers <tigers-bounces at autox.team.net> on behalf of Tigers List <tigers at autox.team.net>
Reply-To: James Armstrong <rollright at aol.com>
Date: Monday, April 2, 2018 at 4:15 PM
To: Tigers List <tigers at autox.team.net>
Subject: [Tigers] Caliper bolts to stainless Grade 8

Hello there,

Anybody know of a good source of replacement bolts made of grade 8 stainless
that will hold the two halves of a rebuilt brake caliper together?
Trying to eliminate any rust.

Jim Armstrong
Mk 1A
382002083 LRXFE
Code 86
TAC #....


________________________________

CONFIDENTIALITY NOTICE: This email and any attachments are for the sole use of the intended recipient(s) and contain information that may be Garmin confidential and/or Garmin legally privileged. If you have received this email in error, please notify the sender by reply email and delete the message. Any disclosure, copying, distribution or use of this communication (including attachments) by someone other than the intended recipient is prohibited. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20180402/ddf6a27b/attachment-0001.html>