[Tigers] Motor Mount Question

[daniel doornbos]

>From past discussion I see the correct Ford Motor Mount PN are  C3AZ-6038-G for RH and C3AZ-6038-H for LH.  And that people frequently swap them left and right to move the motor back or is it down?


Has anyone used Prothane 6-503 ford mounts?  It didn't look like to me there was a right/left.  Wondering how these fit compared to stock.  Look a bit bigger and wondering if I'll run into header or steering interference.


I ask because I'm starting mock up work and am selecting motor mounts for as build to fit a T5.  I've ordered a T5 2.95 first with a modern drive line's S10 like tail housing  http://www.moderndriveline.com/Technical_Bits/front-shift-T5-tailhousing.htm   The front shift rear mount shifter is reported to be 13.25 back from the front of the case and a TopLoader shifter is about 14.5 from the front of the case.  I think this will be minimal transmission tunnel modification, I'll have to make a more centered hole.  They also offer a no cut bolt in TKO600 5spd kit for the tiger, looks pretty slick.  I chose the T5 for a bit of cost saving and a bit lighter.


dan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20170207/483ebadf/attachment.html>