[Tigers] Brake light switch

[Jay Laifman]

I made my own for my Alpine after too many failures of the switch.  I'm
happy to take a picture and send it.  I drove the Alpine to work today.  So
I can go out and take a shot shortly.

I just went to a local auto store and looked through their brake switches
for the different cars and bought one - I think I got a GM one.  I built a
bracket, and ran two wires to where the stock hydraulic one is, with two
male electric ends.  So I didn't do any changes to the car itself - except
for mounting the bracket I made.

FWIW, I highly recommend people routinely check how much pressure it takes
to put their brake lights on whenever a shiny car or truck stops behind
them.  These things just don't last.  I even researched and found the best
supplier, got it from them.  Still didn't last.  That's when I gave up.

On Mon, Aug 7, 2017 at 8:34 AM, Ron Fraser via Tigers <tigers at autox.team.net
> wrote:

> Stu
>
>                 I feel your pain when it comes to the charging system.
> The generator system on my Tiger was a problem from day one.
>
> After years of researching and thinking about converting to Alternator I
> finally pieced together a conversion I was happy with.
>
>
>
> Parts needed
>
> 1965 style Ford Alternator
>
> One of those one wire voltage regulators you attach to the back of the
> alternator
>
> Make an alternator bracket
>
> Make the original voltage regulator into junction block
>
>
>
> I wrote this article up in 2003 and TE/AE published it in the Rootes
> Review – not sure which one
>
> I included a drawing for the bracket, wire diagram and instruction for
> making the VR into a junction block
>
> The alternator bracket is only good for the Ford style alternator; any
> other alternator would require an different bracket
>
>
>
> For a totally stock look you would have to get one of those Alternators
> that looks just like a generator.
>
>
>
> Ron Fraser
>
>
>
> *From:* Tigers [mailto:tigers-bounces at autox.team.net] *On Behalf Of *Stu
> via Tigers
> *Sent:* Sunday, August 06, 2017 4:19 PM
> *To:* Tiger Net <Tigers at autox.team.net>
> *Subject:* [Tigers] Brake light switch
>
>
>
> The Tiger has been taunting me this year.  The charging system, running
> lousy, then good, then lousy again, etc., all keeping me from the project
> I'd planned to do.  This time its the hydraulic brake light switch.
>
>
>
> Yeah, I know, The warnings have been out there for years.  But this time
> I'm changing to a mechanical switch.
>
>
>
> So, does anyone out there have pictures of the bracket they built to hold
> the switch on the brake pedal arm?  I'm looking for ideas.
>
>
>
> Stu Brennan
>
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/tigers/jay.laifman@
> gmail.com
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20170807/eed1fb6b/attachment.html>