[Tigers] Throttle return spring bracket

[Ron Fraser]

That’s a thought.

Right now this is a curiosity - we shall see where it leads.

Ron Fraser

 

From: CoolVT at aol.com [mailto:CoolVT at aol.com] 
Sent: Tuesday, May 17, 2016 9:33 PM
To: rfraser at bluefrog.com; tigers at Autox.Team.Net
Subject: Re: [Tigers] Throttle return spring bracket

 

Maybe you should add that part to your survey Ron.

 

In a message dated 5/17/2016 8:22:04 P.M. Eastern Daylight Time, tigers at autox.team.net <mailto:tigers at autox.team.net>  writes:

Tiger Parts List

Carb controls – Section DF

1224891                Spring – Accelerator return

1224854                Bracket – Accelerator spring anchorage  Mk I

1229919                Bracket – accelerator spring anchorage  Mk II

These parts all have Rootes part numbers.

I received some information from Graham Vickery on the stock brackets.

If you measure the bracket from the base up to the top tip.

1224854 = 1.6”

1229919 = 3.75”

I measured my bracket at 3.71” so it must be the 1229919 bracket on my B382 series Tiger.

So now I wonder when this bracket was changed.

Ron Fraser



_______________________________________________

tigers at autox.team.net <mailto:tigers at autox.team.net> 

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/tigers/coolvt@aol.com



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20160517/ab35b5fd/attachment.html>