[Tigers] Throttle return spring bracket

[Gary]

Ron,
B9470622 has one like shown on
page 153 in TBON.
Gary


Sent from my iPhone

> On May 15, 2016, at 5:19 PM, Ron Fraser via Tigers <tigers at autox.team.net> wrote:
> 
> Any of you have this bracket on your Tiger engine?
>  
> I do not have a clear picture of this bracket so I cropped a couple of pictures to show most of it.
>  
> Bob Mannel’s book has a couple of pictures – pg. 2-23 and 5-21 – pg. 5-21 also shows a picture of the 1965 bracket which might be on the Mk II engine.
>  
> There is a picture of it in TBON under the front valve cover bolt on pg. 148.  I also have a fuzzy picture of this bracket mounted under the intake manifold bolt with the spring attached.
>  
> Here’s some trivia for you – this bracket C2OZ-9741-B is listed in the Parts List – Section CF – note the 2nd part # for the Mk II
> Carb – Section CF
> 6100458                C2OZ-9741-B      Bracket – accelerator return spring           Mk I
> 6100910                                                Bracket – accelerator return spring           Mk II
>  
> This bracket could be anywhere on your engine – I have 1 picture where it is just a spare part on the engine.
>  
> Ron Fraser
>  
> <New Microsoft Word Document.docx>
> _______________________________________________
> 
> tigers at autox.team.net
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20160515/ecd9f8f6/attachment.html>