[Tigers] Steering Arm
ironbeast at comcast.net
ironbeast at comcast.net
Sat Feb 6 07:45:33 MST 2016
Joel,
I checked my car. Heres what I have.....
'67 Mk1A LHD 1990603 drivers side., pass side 1990602
----- Original Message -----
From: "Joel Martin via Tigers" <tigers at autox.team.net>
To: "Tiger" <tigers at embarqmail.com>, "Tiger List Serve" <tigers at autox.team.net>
Sent: Wednesday, February 3, 2016 6:46:11 PM
Subject: Re: [Tigers] Steering Arm
Lot of good nformation but need some 1 to 1 confirmation.
LHD, 66 MK 1A, steering arms, 1990602 on right(passenger) and 1990603 on left (drivers) - is this correct?
I will check all ideas presented but would like to know I have the correct steering arms definitely on the correct side.
Thanks all
Joel Martin
From: Tiger <tigers at embarqmail.com>
To: Joel Martin <jmartiniii at yahoo.com>; Tiger List Serve <tigers at autox.team.net>
Sent: Tuesday, February 2, 2016 6:58 PM
Subject: Re: [Tigers] Steering Arm
Joel,
O/S and N/S stand respectively for Operator Side and Navigator Side. These are RHD designations, thus the parenthetic R.H. and L.H.
Will - 382001570
Tigers at embarqmail.com
From: Joel Martin via Tigers
Sent: Tuesday, February 02, 2016 5:19 PM
To: Tiger List Serve
Subject: [Tigers] Steering Arm
All
I am officially confused but what else is new. New 15" LAT wheels and 205/50/15 tires installed. Turn the wheel to the right, everything clears nicely both wheels\tires or so I think. Turn the wheel to the left, the RIGHT tire hits the bolt for the tie rod at the junction of the steering rack and tie rod bolt plus the front sway bar bracket and rubber bushing - the one closest to lower control arm by bottom bolt
I had issues with the right, I think, steering arm, which had been welded by a previous owner and replaced it with what I thought was correct one - I did not write down the numbers of the steering arms that were used and cannot see them on the car - now went out, jacked up car and checked. Numbers facing down 1990602 on right and think 1990603 on left
In checking the tiger parts list, it shows 1224640 as the steering Arm, O/S (R.H.) and 1224641 as the steering arm, N/S (L.H.) - not sure what O/S and N/S stand for?
Parts list for Alpine steering arm from Series IV shows 1206258 O/S (R.H.) and 1206259 N.S. (L.H.)
Here is the kicker regarding numbers: Old welded number (R.H.I think right) 1990603 and on a second line 17300AJGSBEN16T
One I purchased which I did not use is 1990602 JG6B17299A2EN16T - all on 1 line on the steering arm, I thought was left but now not sure and purchased another one used.
1. What is the correct part numbers on the actual steering arm for right and left?
2. Which direction does the tall middle bolt side face - outside or inside when mounted?
2. Could this possibly be the right tire rub issue? or other things to check?
Struggling
Joel Martin
_______________________________________________
tigers at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/tigers/tigers@embarqmail.com
_______________________________________________
tigers at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/tigers/ironbeast@comcast.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20160206/c69a1f38/attachment-0001.html>
More information about the Tigers
mailing list