[Tigers] Whit w Blue Stripe primary wire

[Smit, Theo]

Try British Wiring?
http://www.britishwiring.com/28-Strand-PVC-Wire-14-ga-AWG-p/c128.htm

What I did on mine was to use plain white wire, along with coloured Sharpie markers, to replicate (to the extent that I needed to) the OEM colour combinations. It would not hold up the same as real molded in colour, but it is sufficient to trace wiring runs from one side of the car to the other.

Theo

From: Tigers <tigers-bounces at autox.team.net<mailto:tigers-bounces at autox.team.net>> on behalf of Tigers List <tigers at autox.team.net<mailto:tigers at autox.team.net>>
Reply-To: Bill Lawrence <billlawrence at hotmail.com<mailto:billlawrence at hotmail.com>>
Date: Friday, December 9, 2016 at 8:03 AM
To: Tigers List <tigers at autox.team.net<mailto:tigers at autox.team.net>>
Subject: [Tigers] Whit w Blue Stripe primary wire


Hello Everyone,


I am hunting for a small quantity of primary wire.  I am not having much luck sourcing about 20' of 14 GA White/Blue stripe for my Tiger's ignition system resistor-coil-distributor circuit.  Anybody want to trade a couple yards for some Red Rubber Grease?


Thanks

Bill Lawrence

1965 Sunbeam Tiger

________________________________

CONFIDENTIALITY NOTICE: This email and any attachments are for the sole use of the intended recipient(s) and contain information that may be Garmin confidential and/or Garmin legally privileged. If you have received this email in error, please notify the sender by reply email and delete the message. Any disclosure, copying, distribution or use of this communication (including attachments) by someone other than the intended recipient is prohibited. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20161209/c954941a/attachment.html>