[Tigers] Dashboard lift-the-dot stud locations.

[Samouce's]

Thanks RON!  Spot on.  Just discovered that my old cover has shrunk and NWIH
will reach the studs...nice L

 

Duke

 

From: Ron Fraser [mailto:rfraser at bluefrog.com] 
Sent: Sunday, March 29, 2015 11:16 AM
To: 'Samouce's'
Cc: tigers at autox.team.net
Subject: RE: [Tigers] Dashboard lift-the-dot stud locations.

 

Duke

    It is my understanding that there are a couple different locations for
these studs so 1st you need the tonneau on hand for a rough estimate of
where the stud should be located.

 

Your Tiger should be similar to mine for these location.

Pictures enclosed

1-    Center 2

2-    Center to glass

3-     Right corner

 

Hope that helps 

Ron Fraser

 

 

 

-----Original Message-----
From: Tigers [mailto:tigers-bounces at autox.team.net] On Behalf Of Samouce's
via Tigers
Sent: Sunday, March 29, 2015 11:02 AM
To: tigers at autox.team.net
Subject: [Tigers] Dashboard lift-the-dot stud locations.

Hello all!

 

Been asked a few times but I have never gotten measurements or pictures of
the dash hole locations. I need this info to find the holes from the top of
the dash with dash cover installed. Will then install the studs.

Really want to use my tonnaeu cover this year. 

TIA for any help.

 

Duke

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20150329/d52e4389/attachment.html>