[Tigers] starters for a stock 260 Tiger, the long and the short of it

[Ron Fraser]

Jim 
    Here is one article I found.  I believe it was written by Bob Mannel.
Hope it helps.
 
http://www.allfordmustangs.com/forums/attachments/classic-tech/85626d1260824
206-1964-1-2-mustang-starter-replace-starters-001.jpg
 
Ron Fraser

-----Original Message-----
From: Tigers [mailto:tigers-bounces at autox.team.net] On Behalf Of
Rollright--- via Tigers
Sent: Tuesday, June 09, 2015 9:25 AM
To: tigers at autox.team.net
Subject: [Tigers] starters for a stock 260 Tiger,the long and the short of
it



Hello,
 
I got some really good information from listers yesterday. Thanks to all.
I'm leaning towards an IMI unit. But...
 
It turns out that there are two starters that differ in their snout length
(shaft with gear, measured from mounting surface to longest point on shaft
with gear)
 
One kind lister said that the longer one is for small-block Fords with
automatic transmissions, shorter ones for manual. The owner at IMI, a Tiger
owner for about 18 months, didn't know if this was so. He has both.
Long is about 15MM, short is about 6MM
 
This appears to be the final piece to the puzzle. Can anyone help me in
this? 
 
Jim Armstrong
382002083
Mk 1A
code 86
TAC # 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20150609/0f986d62/attachment-0001.html>