[Tigers] Tiger GT

[Smit, Theo]

I9d like to be wrong, but isn9t a Ford 9 inch a lot beefier (and heavier)
than the Dana 44?
http://www.jalopyjournal.com/forum/threads/8-vs-9-ford-rear-end-weight.3018
90/
Or are you using a lightweight housing, hollow axle shafts, and aluminum
centre section?

I do think that the Ford 9 inch (and copied by Toyota, et al) method of
assembling the gears in the centre section and bolting all that into the
carrier is far better than what Dana does.

Cheers,
Theo

On 2015-01-22, 12:41 PM, "Sandy via Tigers" <tigers at autox.team.net> wrote:

>For the records, the Dana 44 that came out of my Tiger weight in at
>162lbs.  This is with brake drums, but NO springs, No e-brake linkage,
>etc.
>
>Maintenance Note :
>
>The PO had some really shady looking sway bar kit that looked like an
>add on afterthought, if you have one of these better check your brake
>lines and the bolts that tighten up the sloppy mess of clamps that hold
>it on.
>
>Sandy
>
>On 1/5/2015 11:50 AM, Sandy Ganz wrote:
>> Thanks for all the GT info and pics. I'm embarking on getting my Tiger
>> 'race ready' but want to have it still have some semblance of a street
>> car (you know sleeper looking).
>>
>> Still debating on removing the top mechanism and things like that.
>> Will need to get into it a bit more to see all the sheet metal.
>>
>> Rear end came out last night, so I'm on my way! Looks like lots of bad
>> welding from the usual cracked traction masters. They got to go...
>>
>> Have a scale and will also weight the removed parts for fun. The
>> initial plan is to remove the D44 and swap with a 9". Hoping to shed
>> some lbs in the process.
>>
>> Will get some pics going as soon ;)
>>
>> Sandy
>>
>> *From:* Sandy Ganz <sganz at pacbell.net>
>> *To:* "tigers at autox.team.net" <tigers at autox.team.net>
>> *Sent:* Wednesday, December 24, 2014 11:04 AM
>> *Subject:* [Tigers] Tiger GT
>>
>> What's the difference in the Tiger vs. Tiger GT structurally? It's it
>> different trim and the convert top assembly removed? Looking to possibly
>> remove the convert top and wonder how the GT was done to see if I could
>> finish the inside up nice but less the convertible top.
>>
>> Thanks
>>
>> Sandy
>> _______________________________________________
>>
>> tigers at autox.team.net <mailto:tigers at autox.team.net>
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe:
>> http://autox.team.net/mailman/options/tigers/sganz@pacbell.net
>_______________________________________________
>
>tigers at autox.team.net
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe:
>http://autox.team.net/mailman/options/tigers/theo.smit@garmin.com
>
>


________________________________

CONFIDENTIALITY NOTICE: This email and any attachments are for the sole use of
the intended recipient(s) and contain information that may be confidential
and/or legally privileged. If you have received this email in error, please
notify the sender by reply email and delete the message. Any disclosure,
copying, distribution or use of this communication (including attachments) by
someone other than the intended recipient is prohibited. Thank you.