[Tigers] Tigers Digest, Vol 7, Issue 45

[CoolVT at aol.com]

We were never told how the car ran before it was stored.  If it ran  fine 
before I'm not sure how air filter interference could develop from the car  
just sitting around.  If the car had the same problem before  
storing.....well, ignore my comment:-)
 
 
In a message dated 2/15/2015 7:12:32 P.M. Eastern Standard Time,  
tigers at autox.team.net writes:

Ditto  what Gene says.
Mine contacts the lid, thus preventing it from shutting on  cold start.
I loosen up the nut, then re-tighten after the valve  shuts.
Why don't I install nuts on the mount post to limit the downward  travel of 
the
lid you ask? I just don't have them in my parts bin and never  think to hit 
the
bolt supply house.

Gary

> From:  genepadgett at comcast.net
>
> FWIW, I have noticed that with the  thin K&N element, the choke flap has
been
> rubbing against the  air cleaner lid a bit.B B  Maybe yours is hanging up 
on
> the top  of the air cleaner housing when the housing is tightened  down,
messing
> up the air flow and A/F ratio.B B  Look for some  rub marks on the inside 
of
> the air cleaner top.
> Just an idea.B  B   Gene
_______________________________________________

tigers at autox.team.net

Donate:  http://www.team.net/donate.html
Archive:  http://www.team.net/archive
Forums:  http://www.team.net/forums
Unsubscribe:  http://autox.team.net/mailman/options/tigers/coolvt@aol.com