[Tigers] Starter

[Jim McLaughlin]

Bob:
>From 2010:
 
 
Hi all
 
After some problems this summer, I had my starter replaced with a more
current high torque Ford PMGR starter (Napa Part # 4N9240...$144)) based
upon some recommendations from this List. It is the same starter as for the
early 90s Mustang 302. In addition to being more efficient it is smaller
thereby allowing for some room between the exhaust header and the starter,
which I was lead to believe would help keep down the heat.
 
Other than some adjustments to the wiring to accommodate the solenoid built
right onto the starter, it was a perfect fit. If you are interested I can
forward a wiring diagram that Tom Parker provided me. I believe Tom also has
this starter installed.
 
OBTW...consistent with Ron's advice did NOT turn in the old starter.
Jim Lindner
B9470033
 
By the way, I use a PMGR starter on my tiger and it works very well!! Plus
you can still use the original ford relay and solenoid with a minor wiring
change that is reversible.
Jim McLaughlin
B382000175LRXFE
From: Tigers [mailto:tigers-bounces at autox.team.net] On Behalf Of Robert J.
Wanty via Tigers
Sent: Wednesday, December 02, 2015 7:59 AM
To: Tigers at autox.team.net
Subject: [Tigers] Starter
 
My 1966 Tiger with a  260 is in need of a new starter.  I gave the parts guy
the OEM part number and he ordered a Motorcraft which does not fit. Any idea
where I might find the correct starter?
 
Bob
B382001318
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20151202/4d052229/attachment-0001.html>