[Tigers] Wood Dash Grab Handle Retrofit

[Allan Ballard]

Ron, you're welcome.

Yes, 6 and 1/2" by 3/4".

The ends are not cut square. They flare out a bit at the bottom.



Sent from my iPhone

> On Apr 24, 2015, at 12:54 PM, Ron Fraser <rfraser at bluefrog.com> wrote:
> 
> Thank you Allan
>  
> Looks like about 6 1/2" and 3/4" - is that correct?
>  
> Is the depth 3/4" too?
>  
> Ron Fraser
> -----Original Message-----
> From: Allan Ballard [mailto:aballard at ix.netcom.com] 
> Sent: Friday, April 24, 2015 12:41 PM
> To: rfraser at bluefrog.com
> Cc: <tigers at Autox.Team.Net>
> Subject: Re: [Tigers] Wood Dash Grab Handle Retrofit
> 
> 
> 
> Sent from my iPhone
> 
>> On Apr 24, 2015, at 10:34 AM, Ron Fraser via Tigers <tigers at autox.team.net> wrote:
>> 
>> What are the dimensions of that grab handle wood piece?
>>  
>> Thanks
>>  
>> Ron Fraser
>> _______________________________________________
>> 
>> tigers at autox.team.net
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe: http://autox.team.net/mailman/options/tigers/aballard@ix.netcom.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/tigers/attachments/20150424/55ad50e0/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image1.jpeg
Type: image/jpeg
Size: 82028 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20150424/55ad50e0/attachment-0002.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image1.jpeg
Type: image/jpeg
Size: 109270 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/tigers/attachments/20150424/55ad50e0/attachment-0003.jpeg>