[Tigers] Was how to remove spark plugs - now plug wires
michael at michaelshortt.com
michael at michaelshortt.com
Sun May 18 18:09:44 MDT 2014
Always had great success with Accel.
Michael
On May 18, 2014 8:04 PM, "Jay Laifman" <jay.laifman at gmail.com> wrote:
> So, changing the plugs was not a big deal. Sure, it took some time, and I
> had
> to swap wrenches and extensions, etc. But not what I was worried about.
>
> I did find that the front passenger side plug needed a thin walled socket
> to
> get in there.
>
> The plugs all looked pretty good, after all that.
>
> BUT, I did find that one plug wire had some serious rust INSIDE at the tip
> of
> the plug. Actually, it was the tip of the plug that was rusted. These are
> MSD wires with some substantial rubber boots. So, I'm assuming some
> moisture
> was trapped in there when the plugs were put in.
>
> The other thing I discovered while inspecting the wires, especially the one
> that had the rust in it, is that the tips do NOT make a good snap on fit.
> You'd think that for fancy MSD brand wires, it would be a substantial click
> in, with pressure holding them touching.
>
> So I'm going with a new brand now. I don't know which one. But, not MSD.
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/tigers/michael@michaelshortt.com
More information about the Tigers
mailing list