[Tigers] Window Regulator Mechanism lube..

[AAAGLASSS at aol.com]

White grease for things that slide, penetrating MC chain lube for the pivot 
 points and the clutch assembly where the handle cranks the regulator. STP 
also  works well in lots of areas.
 
 
In a message dated 10/21/2013 4:57:35 P.M. Pacific Daylight Time,  
drmayf at mayfco.com writes:

I think  a few days ago I think I saw a response that said lube the pin 
type joints  with a heavy gear lube such as a 90 - 140 weight oil. Did I 
see that right  or was my blind eye looking else where.. What was the 
recommendation for  those small rotating joints?  Next is what grease 
would be used for  the gear winder and teeth.  Looks to be a more solid 
grease than axle  grease, but what is a good substitute?   And then the 
track  under the window that pushes it up and down..has same grease as 
the gears  I think,,, but what is it or a good substitute?

Finally putting the  drivers door back together... then the soft top, 
then the soft top cover  then the dash pad, then,. then then


mayf

--  
______________________________
drmayf
Worlds Fastest Sunbeam,  period.
204.913 mph flying mile
210.779 mph exit  speed
_______________________________________________

tigers at autox.team.net

Donate:  http://www.team.net/donate.html
Archive:  http://www.team.net/archive
Forums:  http://www.team.net/forums
Unsubscribe:  http://autox.team.net/mailman/options/tigers/aaaglasss@aol.com