[Tigers] Questions and parts needed

[genepadgett at comcast.net]

I would hazard a guess that all screws used on the Tiger that look like Phillips really are Posi-drives. Seems like everyone I look to replace has been. Regular Phillips are close enough for my purposes, especially if I can get the (formerly) shiny ones in stainless. 


Gene 

----- Original Message -----
From: "Ron Fraser" <rfraser at bluefrog.com> 
To: "Joel Martin" <jmartiniii at yahoo.com>, "Tiger List Serve" <Tigers at autox.team.net> 
Sent: Tuesday, October 8, 2013 5:20:08 PM 
Subject: Re: [Tigers] Questions and parts needed 

Joel 
I believe the vent screws on my Tiger are the original ones; they 
are shiny - chrome and Pozi-drive. 

Ron Fraser 

-----Original Message----- 
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net] 
On Behalf Of Joel Martin 
Sent: Tuesday, October 08, 2013 3:29 PM 
To: Tiger List Serve 
Subject: [Tigers] Questions and parts needed 


All 

Working on the under dash and interior pieces and have a couple of questions 
and a couple of parts needed only available used. 

What type of 
screw head and size holds the 2 dash defroster vents? Are there any other 
parts that go on or around the vents? 

DEFROSTER NOZZLES 4 #8 3/8 
SMS PAN,SL 
??? - Is this correct? 

PAN PAN HEAD 
SL SLOTTED 
ORIG ORIGINAL FASTENER 
Is there a bracket that holds the foot dimmer 
switch to the firewall? If so would need used? - Anyone have one they 
would be willing to part with? 

Does carpet cover the transmission tunnel back of 
the shifter to the rear shelf? The armrest sits on top but not the entire 
length. My carpet kit did not have a piece for this? Also what about the 
rear fender wells - is this carpet or something else? 

I need 1 or 2 of the 
90 degree elbows that attach the defroster hoses to the defusers. Please! 

What do the knobs look like that go onto the vent\temp controllers in the 
dash? Mine are missing and would need to buy a pair? And no, not what you 
are thinking! 

Is there a second bracket that hold the windshield washer bottle to the body 
- front passenger side engine compartment other than just the one bracket 
that holds the bottle? Either I am missing a few holes or there is a second 
bracket. 

As always, thank you for the information and any 
pictures you could provide is greatly appreciated! 

Regards 
Joel Martin 
_______________________________________________ 

tigers at autox.team.net 

Donate: http://www.team.net/donate.html 
Archive: http://www.team.net/archive 
Forums: http://www.team.net/forums 
Unsubscribe: 
http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com 
_______________________________________________ 

tigers at autox.team.net 

Donate: http://www.team.net/donate.html 
Archive: http://www.team.net/archive 
Forums: http://www.team.net/forums 
Unsubscribe: http://autox.team.net/mailman/options/tigers/genepadgett@comcast.net