[Tigers] Tigers Digest, Vol 5, Issue 152
Brent Edinger
banana111 at msn.com
Thu May 16 12:17:16 MDT 2013
John, I just ran another line from the master to the original splitter block
and connected the new line to the original rear brake line. Then I plugged the
port in the splitter
so it still uses the original brake light switch. I like to keep everything
configured for easy
return to original setup.
Brent
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 15 May 2013 15:14:27 -0700
> From: John Stithem <mai65tai at sonic.net>
> To: tigers at autox.team.net
> Subject: Re: [Tigers] Brakes
> Message-ID: <FA817A55-BDE2-4061-AF2F-404B9D9FF2DB at sonic.net>
> Content-Type: text/plain; charset="us-ascii"
>
> With the dual master cylinder set up - how are most people running the
brake
> lines?
> When you run separate lines for front and back brakes -It seems you can't
use
> the stock set up with the lines going to the splitter valve.
> The next question - if you are not using the splitter valve - what are you
> doing in place of the pressure activated brake light switch connected to
the
> splitter?
>
> I am running the stock set up now but thinking of running the dual master
> cylinder for a little redundancy in the braking system should a front or
rear
> line go bad.
>
> Thanks.
>
> John
>
>
*********
More information about the Tigers
mailing list