[Tigers] Tiger Clutch Slave Cylinder Bracket Question

[CoolVT at aol.com]

Some of these brackets have been known to bend over time.  The metal  on 
this one is about 1/3 the thickness of some of the other after market  
brackets. This does have an unusual brace arrangement and maybe that would  prevent 
bending?  If I was buying, I would be asking someone who has  used this 
model for their experience.
The usual sources do have the heavy, unbendable model.
Mark Lafayette
 
 
In a message dated 3/18/2013 9:56:55 A.M. Eastern Daylight Time,  
wseay at embarqmail.com writes:

Joel,

You may be in luck.  There's a MKII (6-bolt)  slave cylinder bracket on ebay
right now.  Check it  out:

http://www.ebay.com/itm/clutch-slave-cylinder-bracket-for-Ford-6-bolt-289-bl
ock-
Sunbeam-Tiger-/190813263829?pt=Vintage_Car_Truck_Parts_Accessories&hash=item
2c6d
5b57d5&vxp=mtr


Will  Seay 382001570
wseay at embarqmail.com

-----Original  Message-----
From: tigers-bounces at autox.team.net  [mailto:tigers-bounces at autox.team.net] 
On
Behalf Of Joel Martin
Sent:  Monday, March 18, 2013 7:34 AM
To: tigers at autox.team.net
Subject:  [Tigers] Tiger Clutch Slave Cylinder Bracket Question

1966 MK 1A  Tiger

It appears since I had to change out the bell housing on a 1965  289 HP 
motor, it
had a bid hole in the bottom, that there must be a  different clutch slave
cylinder bracket for the new 6 bolt bell housing  C5AE-6015E as the 2 bolt 
holes
no longer line up.

I believe the old  bell housing was a C5AA-6394-B.

Was there a different clutch slave  cylinder bracket for the C5AE-6015E?  
If so,
does anyone know the part  number and\or have one they would part with or 
are
they still available  new?

Many steps forward, many steps backwards.

Thanks
Joel  Martin  
_______________________________________________

tigers at autox.team.net

Donate:  http://www.team.net/donate.html
Archive:  http://www.team.net/archive
Forums:  http://www.team.net/forums
Unsubscribe:  http://autox.team.net/mailman/options/tigers/coolvt@aol.com