[Tigers] Distributor vacuum line
Gary Winblad
garywinblad at comcast.net
Sun Jun 30 21:15:29 MDT 2013
Oops.. disregard that last post..
you want to adapt to rubber line.... sorry.
Gary
----- Original Message ----- From: Gary Winblad <garywinblad at comcast.net>
To: genepadgett at comcast.net Cc: tigers at autox.team.net Sent: Mon, 01 Jul 2013
03:13:03 -0000 (UTC) Subject: Re: [Tigers] Distributor vacuum line Gene.
On the original distributor, the entire fitting you need just unscrews. At
least in about 1992 when I did my rebuild, I was able to get a new diaphram
that allowed it to screw in. When you unscrew it, inside is a 'slug' that
allows you to limit the vacuum advance.. was definitely needed too. Gary
----- Original Message ----- From: genepadgett at comcast.net To:
rfraser at bluefrog.com Cc: tigers at autox.team.net Sent: Mon, 01 Jul 2013
02:12:55 -0000 (UTC) Subject: Re: [Tigers] Distributor vacuum line Hi Ron,
Thanks very much. I greatly appreciate the info. I had given up on find these!
Gene ----- Original Message ----- From: "Ron Fraser" To:
genepadgett at comcast.net Cc: tigers at autox.team.net Sent: Sunday, June 30,
2013 8:37:24 PM Subject: RE: [Tigers] Distributor vacuum line Message
Thank Gene I was looking at the end fittings. I could not find the Ford
part number but I did find a description. Maybe someone on the List knows
the Ford part number for this fitting. The fitting are a Brass Fitting -
Threaded Sleeve - Nut. I have an OLD Weatherhead catalog - 3/16 tube -
threaded sleeve nut - 6100X3. A quick Google search will give you several
sources - I saw one that showed $.90 per part and I'm sure there are better
prices. I have a Parts + shop in my area that I think has those but not
sure. They had the 5/16 fuel line to carb fitting so I think they might carry
the nut too. Hopefully someone local has them so you don't have to pay
huge shipping costs. Ron Fraser -----Original Message----- From:
genepadgett at comcast.net [mailto:genepadgett at comcast.net] Sent: Sunday, June
30, 2013 7:44 PM To: rfraser at bluefrog.com Cc: tigers at autox.team.net
Subject: Re: [Tigers] Distributor vacuum line Hi Ron, Yes, full
length measured absolute tip to tip. Original line, off the car and retrieved
from storage shelf for measurement. BTW, any idea where one can get a
fitting for the end that goes into the canister on the original distributor?
Pretty unique sealing tip on it. I did not not want to cut it off the original
line. I had my distributor rebuilt and figured out a way to use a part of a
compression coupler and a hand bent short piece of same sized line to make a
90 degree elbow to hook up a vacuum flexible line to my new carb. So I am good
to go with what I have, but have always been curious about that orginal line-
to- distributor hard line fitting. Gene
_______________________________________________ tigers at autox.team.net
Donate: http://www.team.net/donate.html Archive: http://www.team.net/archive
Forums: http://www.team.net/forums Unsubscribe:
http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net
_______________________________________________ tigers at autox.team.net
Donate: http://www.team.net/donate.html Archive: http://www.team.net/archive
Forums: http://www.team.net/forums Unsubscribe:
http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net
More information about the Tigers
mailing list