[Tigers] Electrical problem - ignition/ballast resistor?

[Jay Laifman]

Seriously?

I had my fingers in there with a very stubby phillips screwdriver and
couldn't get leverage on the one screw I could get to. I gave up figuring
if I couldn't do that one, the three inside were going to be impossible.

I'm going to have to look again and see if I can get my allen key type
phillips screw driver in there.

Jay


On Mon, Jun 3, 2013 at 12:49 PM, csx2282 <csx2282 at sonic.net> wrote:

> I was able to fixed a leaky accelerator pump on my Holley by replacing the
> diaphragm.  I didn't even have to remove the carb.
>
> Roland
>
> ------------------------------
>
>> From: Jay Laifman <jay.laifman at gmail.com>
>>
>> On the flip side, I noticed that the Holley is dripping gas out the
>> bottom,
>> from what looks like an accelerator pump.  Looks like the carb needs to
>> come
>> out to service it.