[Tigers] Info Please...

[Ron Fraser]

Mayf
	Flange = .89"

Parts list shows 7/16 x 1 1/16" bolt for flywheel

Ron Fraser

-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
On Behalf Of Larry Mayfield
Sent: Monday, July 15, 2013 6:50 PM
To: tigers at autox.team.net
Subject: [Tigers] Info Please...


Is there one among you who has his SBF motor apart to where the rear 
crank flange can be measured for thickness?  This would be in essence 
how long the threads are for the flywheel or flex plate bolts... While I 
have a number of cranks and short blocks laying about none are readily 
available to measure.  rough measurement is fine.

Many thanks in advance

mayf

-- 
______________________________
drmayf
Worlds Fastest Sunbeam, period.
204.913 mph flying mile
210.779 mph exit speed _______________________________________________

tigers at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com




-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.3349 / Virus Database: 3204/6492 - Release Date: 07/15/13