[Tigers] Dash Board Lettering

[Theo Smit]

There's also water-slide decal paper intended for model railroad use:
http://www.mcgpaper.com/decalpro.html

You need to have an inkjet printer (with white ink - this could be 
tricky to find but IIRC it is available) and the clear decal film.

Theo

On 1/8/2013 9:17 PM, Sandy Ganz wrote:
> I found a system a while ago that would work where you transfer the image from a
> black and white laser printer on special plastic then do some magic to pull the
> image off and transfer it to the dash. It may have been for electronic
> enclosures and looked like it would be OK if transfered to the dash then a layer
> of urethane over it.
>
>
> I may have mentioned it a few years back here on the list, but ended up getting
> a dashboard with then already on it.
>
> Sandy
>
>
>
> ----- Original Message ----
> From: Theo Smit <tsmit at shaw.ca>
> To: tigers at autox.team.net
> Sent: Tue, January 8, 2013 7:27:06 PM
> Subject: Re: [Tigers] Dash Board Lettering
>
> On 1/8/2013 7:38 PM, Joe Brown wrote:
>> Does anybody know if Paul Brehuan is still making the dry transfer lettering
>> for the dashes?  He hasn't responded to my emails.
>>
>>
> Did you try contacting him through his website info?
> http://www.breuhan.com/index.html
>
> Cheers,
> Theo
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/tigers/sganz@pacbell.net