[Tigers] Cobra continuation

[Dave Munroe]

Thanks Larry:

Good to know. - I'm going to try them. I can put them on the 10 bolts that 
have no pipe interference, and lock-wire the other six. Those Percy's Head 
Gaskets sound good too. I don't need to keep digging down into the header 
area all the time to keep the headers sealed!

Appreciate the input!

Dave



----- Original Message ----- 
From: "Larry Paulick" <lpaulick1 at verizon.net>
To: "Rense, Mark (GE, Appl & Light)" <mark.rense at ge.com>
Cc: "Dave Munroe" <dave at munroe.ca>; <tigers at autox.team.net>
Sent: Wednesday, August 21, 2013 2:15 PM

These work, as  I have used them on my Tiger since 2000.

Larry


On Aug 21, 2013, at 12:12 PM, Rense, Mark (GE, Appl & Light) wrote:

> Dave, Header bolts are hard to keep tight on some applications, these 
> locks
> are small enough they should fit. Otherwise you can always drill the bolt
> heads
> and safety wire them, something not easily done in a Tiger!
>
> http://www.summitracing.com/parts/stg-8913/overview/make/ford
>
> Also consider the Percy's gaskets, they work.
> http://www.summitracing.com/parts/php-65014/overview/make/ford