[Tigers] Clutch rebuild kit

[Will Seay]

Jay,

The shop manual has an exploded view of clutch master and slave cylinders, pp C7
in my copy.  Maybe you can find where your mystery part goes from that.

Will Seay 382001570
wseay at embarqmail.com
"I think not therefore I am not" (anon)

-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net] On
Behalf Of Jay Laifman
Sent: Friday, April 26, 2013 10:36 PM
To: Tiger's Den
Subject: [Tigers] Clutch rebuild kit

I got the rebuild kits for the master and slave from Rick.  There is an extra
rubber piece in the master kit that I don't know where it goes.  There was the
dust cap.  There was the seal that goes into the piston.  There is the small
seal that goes under the plastic part at the end of the rod attached to the
piston.  I got all those.  But there is one more rubber ring.  It is bevelled.
I have no idea where it goes.  It's not on the car, and I don't recall one like
it on previous masters that I've rebuilt.  It is about big enough to go around
the end of the plunger, between the plunger and the plate that holds the plunger
in.  But, that  doesn't really make sense - unless just one more possible dust
seal.

I have a picture I can email if it would help.

Thanks,