[Tigers] Clutch rebuild kit

[Ron Fraser]

Jay
	The first possibility is that the rebuild kit is becoming more
generic and contains extra parts.

2nd is the rubber ring big enough that it might be the seal for the
reservoir cap.

Ron Fraser

-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
On Behalf Of Jay Laifman
Sent: Friday, April 26, 2013 10:36 PM
To: Tiger's Den
Subject: [Tigers] Clutch rebuild kit


I got the rebuild kits for the master and slave from Rick.  There is an
extra rubber piece in the master kit that I don't know where it goes.  There
was the dust cap.  There was the seal that goes into the piston.  There is
the small seal that goes under the plastic part at the end of the rod
attached to the piston.  I got all those.  But there is one more rubber
ring.  It is bevelled. I have no idea where it goes.  It's not on the car,
and I don't recall one like it on previous masters that I've rebuilt.  It is
about big enough to go around the end of the plunger, between the plunger
and the plate that holds the plunger in.  But, that  doesn't really make
sense - unless just one more possible dust seal.

I have a picture I can email if it would help.

Thanks,
_______________________________________________

tigers at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com