[Tigers] Water Sensor

[Ron Fraser]

George
	Do you have the MK I temp sender housing with 3 hose ports?

I ran a hose from the MK I temp sender housing around and below the carb to
the "T" fitting at the heater core hose.

Original Spacer plate part # - C2AZ-9A589-H in case your looking for one of
these spacers.

Ron Fraser

-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
On Behalf Of George Re
Sent: Thursday, April 25, 2013 1:16 PM
To: Tigers
Subject: [Tigers] Water Sensor


Hi Guys. My question this time is where do you put the temp. sensor when you
do not have a water plate under the carb?. I know this has happened to some
one else before and there must be a a different way to route the hoses. If
anyone knows please let me know.

Thanks Again
George Re
_______________________________________________

tigers at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com




-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2904 / Virus Database: 3162/6272 - Release Date: 04/25/13