[Tigers] Engine ID Plate Stamping

[Rense, Mark (GE, Appl & Light)]

Thanks Ron!

-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net] On
Behalf Of Ron Fraser
Sent: Wednesday, April 17, 2013 7:16 PM
To: 'Andy Walker'; 'Mark Rense'; tigers at autox.team.net
Subject: Re: [Tigers] Engine ID Plate Stamping

Andy & Mark

Your talking about the Sunbeam LTD emblem for the valve cover right?

Not the aluminum engine ID tag.

Here is a note from Duke Samouce for the Sunbeam LTD emblem.

-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
On Behalf Of Samouce's
Sent: Friday, January 16, 2009 6:54 PM
To: tigers at autox.team.net
Subject: [Tigers] Engine decal done....and done very well.


A happy Friday evening to you all,

The engine decal was had stamped by Larry Atkisson for $35. Here is his email
- catkisson at aol.com

http://e28-535i.com/upload/tgr2.JPG

You can see the progress on the engine here -
http://www.sunbeamalpine.org/forum/showthread.php?t=9028

Thanks for looking

Duke
B382002037