[Tigers] Sunbeam Clutch Release Fork

[Ron Fraser]

Karl
	Mustangtek.com shows this for that fork.
64-65 260 Mustang

63-64 260 Ford Fairlane Falcon

65-67 all_6cyl Fairlane w/HD_clutch

 10" long

 C3AZ-7515-A

I don't know how accurate the information.

Macsautoparts.com lists a C3DZ-7515-B for a 260 Comet but there is no
description to know if it is compatible.

Have you looked in an interchange parts book to see if the C3AZ part was
updated by Ford?

As for the Archive Mark is working on that; it is possible that it is not
fully functional or totally up to date.


-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
On Behalf Of Karl Adey
Sent: Wednesday, November 21, 2012 1:15 PM
To: The LIST Post
Subject: [Tigers] Sunbeam Clutch Release Fork


Apparently when the throw-out bearing seized on the Tiger in the early 90s,
it wore down the clutch fork beyond tolerance.  Now I need a 'new' fork,
clutch, clutch plate and throwout bearing.  I know that some of those parts
are available from SS.  I was told that I should switch from a 3 finger to a
diaphram clutch and that perhaps a larger clutch may help also.  I can't
find a fork (P/N C3AZ-7515-A I assume).  Anyone have any ideas?Karl AdeyMk1
Original 260 with original 5 bolt trans. As a side note, I can't seem to be
able to search the Tigers Archive.  I read that the search feature had been
fixed a while ago, is that not the case?
_______________________________________________

tigers at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com




-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2793 / Virus Database: 2629/5907 - Release Date: 11/20/12