[Tigers] Originality: water hoses

[Ron Fraser]

Mark
    You are correct - there is a band clamp that holds the long heater hose
from the heater valve to the bulkhead with a screw.  This keeps the hose
away from the stock air cleaner and off the fender brace mount.
 
The short heater hose goes to the T fitting - no bulkhead clamp needed.
 
Ron Fraser
 
 

-----Original Message-----
From: CoolVT at aol.com [mailto:CoolVT at aol.com] 
Sent: Wednesday, June 27, 2012 9:18 PM
To: rfraser at bluefrog.com; aballard at ix.netcom.com; tigers at autox.team.net
Subject: Re: [Tigers] Originality: water hoses



If my memory serves me right, there was a clamp on the bulkhead of the
driver's side that isn't shown in the picture.  It attached the hose to the
bulkhead/firewall.  I think there was a clamp somewhere on the passenger
side as well, but can't remember where.
Mark L
 
In a message dated 6/27/2012 9:06:01 P.M. Eastern Daylight Time,
rfraser at bluefrog.com writes:

http://www.tigersunited.com/resources/wsm/wsmR4.asp