[Tigers] flexplate motor to flywheel

[steve wick]

If the engine is a stock rebuild, or original, you should be ok. If the engine
was rebuilt and balanced with the flex plate on, you might have an issue. Don
't forget to install a pilot bushing. Steve (in N.Idaho)
 > Date: Mon, 27 Feb 2012 10:55:18 -0700
> From: bobdixon at frii.com
> To: tigers at autox.team.net
> Subject: [Tigers] flexplate motor to flywheel
>
> Hi gang,
>
> This may seem like a dumb question but here goes.  If you want to put a
> 289 that was hooked to an automatic trans into a car with a manual
> trans, can you just swap the flexplate with a flywheel?  I wasn't sure
> if the engine is typically balanced by adding or removing material from
> the flywheel.
>
> Thanks,
> Bob
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
http://autox.team.net/mailman/options/tigers/srwick@hotmail.com