[Tigers] overrider fixing hardware question

[Ron Fraser]

Jim
	I have one of those overrider's that someone torched off a bumper.
The bolt is a 7/16 UNF square head inside a cage welded to the overrider.

I do see an overrider and 3/8 bolt listed as an alternative listed in the
Parts List for June 1968.

Looks like all the bumper hardware is 7/16 so why not make everything the
same size.

Ron Fraser

-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
On Behalf Of Rollright at aol.com
Sent: Tuesday, September 20, 2011 7:22 PM
To: tigers at Autox.Team.Net
Subject: [Tigers] overrider fixing hardware question


Hello there,
 
I'm getting some overriders chromed. Brought them in today.
 
They are the earlier kind with the steel insert brazed inside.
 
Since they don't use the newer fixing carriage bolt, I attempted  to look 
up the fixing hardware
in the parts book.
 
Unfortunately, it doesn't mention fixing hardware for the older  overrider.
 
Can anybody tell me what bolt (and thread size) is correct for this  
application.
 
 
Jim  Armstrong
Mk 1A 
382002083
LRXFE
_______________________________________________

tigers at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com


No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 8.5.449 / Virus Database: 271.1.1/3905 - Release Date: 09/19/11
18:35:00