[Tigers] bolts and hardware

[Allan Ballard]

I took a broken over rider bolt to the best ACE in this area and they ordered
carriage bolts
in the length needed.

The only difference from the factory bolts is that they don't have a square
head to hold the bolt securely within
the over rider while tightening but they do have a domed end, enabling the
rubber part to
fit nicely.

However since they are new I was able to tighten them easily.

Good luck!

Allan Ballard
Mk1a Tiger
SIV Alpine

On Oct 28, 2011, at 10:23 AM, Randy Smith wrote:

> Jim-
>
> I have not looked for these specific bolts, but you might try
> McMaster-Carr.  You can order from them online and they have most anything.
>
> www.mcmaster.com/
>
> -Randy
>
> On 10/28/2011 8:34 AM, Rollright at aol.com wrote:
>> Hello,
>>
>> After going to my local Ace hardware store and finding they didn't have
>> about half of what I need for my bumper project, I'm asking:
>>
>> Can I get suggestions for online hardware/fastener suppliers, please?
I'm
>> finding 7/16 UNF and 1/2 UNF in the lengths I need, to be a bit of  a
>> challenge.  A source that is EASY to use would suite me best. I've  been
>> challenged by what I came up with on a Google search.
>>
>> Thanks in advance,
>>
>> Jim  Armstrong
>> Mk 1A
>> 382002083
>> LRXFE
>>
>> --
>>
>> Randy Smith
>> INNER QUEST, Inc.
>> 34752 Charles Town Pike
>> Purcellville, VA  20132
>> 703-478-1078
>> 540-668-6699
>> 540-668-6253 fax
>>
>> InnerQuestOnline.com <http://www.innerquestonline.com/>
>> Randy at InnerQuestOnline.com <mailto:Randy at InnerQuestOnline.com>
>> Tiger- B382000189
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
http://autox.team.net/mailman/options/tigers/allanballard@att.net