[Tigers] barrel slug with hole in center

[e.coiner at cox.net]

Got it.

Those go between the mounting bracket and the body of the car on the REAR bumper.  You will not that the threaded hole is recessed from the body panels on the rear.  Those spacers prevent the bracket from mashing the body panels flat in that area.

Erich
---- Rollright at aol.com wrote: 
> Hello,
>  
> To clarify on the bumper hardware, I got several replys indicating that I  
> misled some folks. In the spirit of clarity:  
> No not those pieces that are curved (to mate with bumper) on one  side and 
> flat on the other. 
> 
> This is a little barrel affair with a hole in the middle, 3/4" long, an  
> inch in diameter and a half inch hole in the center drilled through the 3/4 
> inch  dimension.
>  
>  
> 
> 
> Jim