[Tigers] Ground strap?

[Gary Winblad]

Alpine transmission crossmember MOUNTING bolt hole (no bracket on Tiger ;-)   ).
Engine side is by the bolt that holds the clutch slave on mine...

Gary

----- Original Message -----
From: Theo Smit <Theo.Smit at dynastream.com>
To: Tim Webster <crabco at shaw.ca>, tigers at autox.team.net
Sent: Tue, 11 Oct 2011 17:31:56 -0000 (UTC)
Subject: Re: [Tigers] Ground strap?

On mine, the strap ends were attached to the welded-in nut on the Alpine
transmission crossmember bracket; and on the lower transmission to bellhousing
bolt. I think both were on the passenger side though.

Theo

>
> Hello,
>
>
>
> Just wondering what the correct fastening points are for the ground
> strap
> that connects the frame to the engine under the driver's floor pan?
>
>
>
> Thank you,
>


This e-mail and any attachments may contain confidential material for the sole
use of the intended recipient. If you are not the intended recipient, please
be aware that any disclosure, copying, distribution or use of this e-mail or
any attachment is prohibited. If you have received this e-mail in error,
please contact the sender and delete all copies.

Thank you for your cooperation.
_______________________________________________

tigers at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/tigers/garywinblad@comcast.net