[Tigers] Factory wire gauge

Ron Fraser rfraser at bluefrog.com
Mon May 2 15:21:22 MDT 2011


Allan
	The gauge wire you use needs to be rated for the amperage the
electric fan draws, the length of the wire and the type of covering.

Most of the wiring is 18 gauge, rated around 8 to 10 amps in the original
harness, horns and headlights are 14 gauge, rated around 17 amps in the
original harness.  Remember the original harness is to British standards.

Check BritishWiring.com for more information about British wire sizes.

Today's automotive wire will generally handle a little more amperage.   If
the fan comes with a wire kit use that wire it is the correct size.

Ron Fraser

-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
On Behalf Of allanballard at att.net
Sent: Monday, May 02, 2011 3:29 PM
To: Jeffery Randall
Cc: tigers at autox.team.net
Subject: [Tigers] Factory wire gauge


What gauge wire did the factory use in the engine compartment?

I'd like to add an electric fan and use wires that "match" the factory
wires.

Thanks in advance,

Allan Ballard
Mk1 Tiger
Series IV Alpine

Sent from my iPhone _______________________________________________
Tigers at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.com

No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 8.5.449 / Virus Database: 271.1.1/3606 - Release Date: 05/02/11
06:35:00


More information about the Tigers mailing list