[Tigers] Temp Gauge Accuracy

[michael king]

I was under the impression that the autometer temp senders did not read
accurately with the stock gauge.. at least when in the manifold. I have the
autometer in my and with a newly installed nOS gauge.. its 10deg C lower on
the gauge than actual temp.



On 1 April 2011 10:59, Ron Fraser <rfraser at bluefrog.com> wrote:

> Jim
>        This is a post from several years ago from Tom Prager maybe it will
> help.
>
>  On Behalf Of Thomas Prager
> > Sent: Monday, September 04, 2006 10:18 AM
> > To: tigers_United_forum
> > Subject: sending unit for Edelbrock manifold
> >
> >
> > A good solution to the temperature sender "problem" is to buy an
> > AutoMeter temp sender and screw it in.  It runs the stock gauge
> > PERFECTLY.  It costs about $20 and comes with several thread adapters.
> > The Autometer temperature sender that will work with the stock Jaeger
> > gauge is Model 2254.
> >
> > tom--
> Regards
>
> Michael King