[Tigers] Throwout Bearing
Carmods at aol.com
Carmods at aol.com
Sat Mar 26 07:12:28 MST 2011
Hi Duke,
To get the correct 10 lb preload on the throwout bearing when the clutch
is engaged, divide 10lb by the throwout arm ratio and select a spring that
will provide that force when the clutch is engaged and also stretch to the
full length without taking a set when the clutch is fully disengaged.
John Logan
In a message dated 3/25/2011 2:00:35 P.M. Eastern Daylight Time,
wsamouce at kc.rr.com writes:
I may use a spring anyway though.
More information about the Tigers
mailing list