[Tigers] Tiger Seats

[Joe Parlanti]

Tod,

Owain is correct, art board or mat board works just fine. I suspect that you
could also use automotive door board but it may be a little stiff. One thing
you may want to think about; some folks have added a very thin (1/8" - 1/4")
piece of foam to the outer side of the cardboard to give the back of the
seat a softer feel.

Good Luck,

JVP

Joseph V. Parlanti
16048 Copen Meadow Dr
North Potomac, Md. 20878
Cell - 301-461-0626
Email - Parlanti at comcast.net


-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
On Behalf Of Tod Brown
Sent: Saturday, March 05, 2011 10:43 PM
To: tigers at autox.team.net
Subject: [Tigers] Tiger Seats

I've been redoing my seats and, so far, have them apart,  I would like 
to replace the cardboard on the back of the seat frames which is in 
pretty sad shape after almost forty-five years.  Does anyone have any 
advice on what to use and where to get it?  My preference would be for 
something a bit more moisture resistance than the original cardboard.  
Thanks in advance.

Tod
B382002384LRXFE
TAC 864