[Tigers] Tiger lug nut size

[genepadgett at comcast.net]

Per my crude attempt at measuring, I would say the taper on a stock wheel nut
is somewhere in the range of 107 degrees toB  110 degrees. That is the angle
between one angled side of the wheel mating surface B through the nut body to
the other angled side. In the past, I have been able to get replacement wheel
studs and nuts from Sunbeam Specialties.B Agai n, we are talking about stock
lug nuts and stock 13 inch steel wheels.



Hope that helps. Gene



----- Original Message -----


From: "Mike Michels" <mmichels at socal.rr.com>
To: "Allan Ballard" <allanballard at att.net>, genepadgett at comcast.net
Cc: tigers at autox.team.net
Sent: Saturday, June 25, 2011 5:50:05 PM
Subject: RE: [Tigers] Tiger lug nut size

So what's the correct taper angle and where does one find them?

-----Original Message-----
From: tigers-bounces at autox.team.net [mailto:tigers-bounces at autox.team.net]
On Behalf Of Allan Ballard
Sent: Saturday, June 25, 2011 12:18 PM
To: genepadgett at comcast.net
Cc: tigers at autox.team.net
Subject: Re: [Tigers] Tiger lug nut size

Thanks folks,

I'll check that. I replaced with O'Reillys chrome lugs.

Allan Ballard
Mk1a Tiger
SIV Alpine

On Jun 25, 2011, at 1:19 PM, genepadgett at comcast.net wrote:

> Also, if you are looking to replace stock wheel nuts, remenber that the
conical angle on the factory nuts is different from what is on a standard
American 7/16-20 lug nut. B  An American 7/16 nut typically will have a 60
degree angle to it that will not seat properly on the stock wheel.
>
> Gene
>
> From: allanballard at att.net
> To: "<rfraser at bluefrog.com>" <rfraser at bluefrog.com>
> Cc: "<tigers at autox.team.net>" <tigers at autox.team.net>
> Sent: Saturday, June 25, 2011 9:31:34 AM
> Subject: Re: [Tigers] Tiger lug nut size
>
> Thanks - great to see the List working again.
>
> Allan
> Mk1a Tiger
>
> Sent from my iPhone
>
> On Jun 25, 2011, at 9:45 AM, " Ron Fraser" <rfraser at bluefrog.com> wrote:
>
> > Allan
> > B  B 7/16 x 20
> >
> > Ron Fraser
> >
> > -----Original Message-----
> > From: tigers-bounces at autox.team.net
[mailto:tigers-bounces at autox.team.net]
> > On Behalf Of Allan Ballard
> > Sent: Saturday, June 25, 2011 4:33 AM
> > To: tigers at autox.team.net
> > Subject: [Tigers] Tiger lug nut size
> >
> >
> > Does anyone know the replacement size for Tiger lug nuts?
> >
> > Allan Ballard
> > Mk1a Tiger
> > _______________________________________________
> >
> > tigers at autox.team.net
> >
> > Donate: http://www.team.net/donate.html
> > Archive: http://www.team.net/archive
> > Forums: http://www.team.net/forums
> > Unsubscribe:
> > http://autox.team.net/mailman/options/tigers/rfraser@bluefrog.biz
> >
> >
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com
> > Version: 8.5.449 / Virus Database: 271.1.1/3723 - Release Date: 06/24/11
> > 06:34:00
> _______________________________________________
>
> tigers at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
http://autox.team.net/mailman/options/tigers/genepadgett@comcast.net
_______________________________________________

tigers at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/tigers/mmichels@socal.rr.com