[Tigers] Gas tank crossover tube fitting

[genepadgett at comcast.net]

Theo, thats an excellent alternative solution.B  T hanks for taking the time
to pass it along.B B  Much appreciated! Gene

----- Original Message -----
From: "Theo Smit" <Theo.Smit at dynastream.com>
To: "Owain Lloyd" <owain.lloyd at gmail.com>, genepadgett at comcast.net
Cc: tigers at autox.team.net
Sent: Monday, July 4, 2011 8:48:40 AM
Subject: RE: [Tigers] Gas tank crossover tube fitting

When I re-plumbed my fuel system, I kept about 3" of the 5/16" line including
the compression fitting end, and soldered it into a 3/8" pipe that supplies
the fuel pump. It's not as good as having 3/8" all the way but I figured the
short piece of 5/16 would limit the difference.

Theo

> -----Original Message-----
> From: tigers-bounces at autox.team.net [mailto:tigers-
> bounces at autox.team.net] On Behalf Of Owain Lloyd
> Sent: July 3, 2011 8:48 PM
> To: genepadgett at comcast.net
> Cc: tigers at autox.team.net
> Subject: Re: [Tigers] Gas tank crossover tube fitting
>
> I have photos of the fitting somewhere. B I will share later if you
> like.
>
> the reason I did this job was I was getting dead spots at the end of a
> long
> straight on full throttle. B this was the last 5/16 in the system and
> 3/8 fixed
> it.
>
> On Jul 3, 2011, at 22:20, genepadgett at comcast.net wrote:


This e-mail and any attachments may contain confidential material for the sole
use of the intended recipient. If you are not the intended recipient, please
be aware that any disclosure, copying, distribution or use of this e-mail or
any attachment is prohibited. If you have received this e-mail in error,
please contact the sender and delete all copies.

Thank you for your cooperation.