[Tigers] Canton pan # 15630

[Smit, Theo]

If that's the one that is listed by Canton as a Tiger part, then it works and
doesn't require any cutting of anything to fit. I have one and their matching
pickup and windage tray as well. No leaks at the gasket surface.

The only bad thing is that you will not be able to install/remove the engine
and trans assembly without going out the bottom. You can, however, remove and
install the pan while the engine is in the car, without too many shenanigans.
All pan bolts are reasonably accessible.

Cheers,
Theo

> -----Original Message-----
> From: tigers-bounces at autox.team.net [mailto:tigers-
> bounces at autox.team.net] On Behalf Of wsamouce at kc.rr.com
> Sent: January 26, 2011 8:23 AM
> To: tigers at autox.team.net
> Subject: [Tigers] Canton pan # 15630
>
> Hello all,
>
> I am in the final stages of getting parts for the 347.
>
> Oil pan - does the Canton pan # 15630 fit without modification to the
> cross member?  Can anyone that has the 15630 install confirm?
>
> Please do not point me to the to the $500 AVIAID pan.  Looking at the
> Canton.
>
> Thanks,
> Duke
> B382002037
> _______________________________________________
> Tigers at autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/tigers/theo.smit@dynastream.com
>


This e-mail and any attachments may contain confidential material for the sole
use of the intended recipient. If you are not the intended recipient, please
be aware that any disclosure, copying, distribution or use of this e-mail or
any attachment is prohibited. If you have received this e-mail in error,
please contact the sender and delete all copies.

Thank you for your cooperation.