[Tigers] Replacing a rear wheel lug stud

[Tony Somebody]

I don't have a garage at my home but a shop on the other side of our small
town, so I can't just walk out and look but there "might" be one way that
would work. A hole drilled thru the brake backing plate. As the backing plate
is so close to the axle hub that it is impossible to get a lug bolt between
the two- least wise not square enough to insert the new bolt. It would have to
be inspected and see that it wouldnt interfere with anything, be large enough
for the big end to pass thru and you would want to match the size with a hole
plug so with a bit of silicone and the plug, no water, dirt etc would get
inside of the hub. I dont know if this is possible but it may be worth looking
at.
TtT
--- On Fri, 1/14/11, Thomas Witt <atwittsend at verizon.net> wrote:


From: Thomas Witt <atwittsend at verizon.net>
Subject: Re: [Tigers] Replacing a rear wheel lug stud
To: tigers at autox.team.net
Date: Friday, January 14, 2011, 4:03 PM


Well..., there is the joyful task of pulling the hub as another option.

Tom
_______________________________________________
Tigers at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/achd73@yahoo.com