[Tigers] Mazda brake comvertion

[Carmods at aol.com]

In a message dated 1/10/2011 7:19:00 P.M. Eastern Standard Time,  
wsamouce at kc.rr.com writes:

Because the
RX7 cable outer sheath is clamped to the caliper, I  will not need that on
the hand brake side.  I will only know if this  will work once I have the
caliper mounted and then start to work  it.


Hi Duke, 
 
I'm not sure what you are saying here, but you must  attach the outer 
sheath to the caliper at one end, as shown in your picture,  and the sheath must 
be grounded at the handle bracket or body at the other end  . Otherwise you 
will be pulling the whole caliper forward  when you apply the parking brake.
 
John  Logan