[Tigers] seal help

[Tony Somebody]

THANKS to everyone who replied to my request for help.
I didn't mean to make anyone think I was trying to slide the seal thru. None
the less I will get them in.
I also have a couple of hardtops that where on ebay.They are stripped, w/ no
trim etc.
I will look for numbers the next time I'm in the storage container.
Thanks again, Tony




From: Larry Mayfield <drmayf at mayfco.com>
Subject: Re: [Tigers] seal help
To: tigers at autox.team.net
Date: Sunday, January 2, 2011, 10:44 AM


My tool of choice is a popsicle stick.  I use that for all the weather
striping where needed. And wood is generally softer than the paint and
certainly duller than a screwdriver...

mayf

On 1/2/2011 8:21 AM, Gary wrote:
> Tony,
>
> I use a small flat tip screwdriver to install the rubber seal, instead of
> trying to slide it. I put one edge of the rubber in the track and then pop
in
> the opposite edge and work my way along the track. There should also be
holes
> for a screw near each end of the seal to keep it from coming out, once it
is
> installed. I then trim it to length.
>
> Gary
_______________________________________________
Tigers at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/achd73@yahoo.com