[Tigers] 5 speed transmission
Buck Trippel
BuckTrippel at Verizon.net
Thu Feb 24 08:16:15 MST 2011
When I put the T-5 (Ford case/ S10 tail housing) into a Tiger, I used an
electronic speedometer I happened to own. I used the electronic sensor setup
that came on 1990 & later S10s. (Reluctor, sensor and pigtail). All were
available after-market from Standard Products.
The Chevy reluctor is larger than the Ford shaft so I made a shim for the
shaft and pressed the reluctor into place. If I were to do it again, I'd
make the shim thinner and secure it with hi-temp JB Weld or something
similar.
Buck Trippel
--------------------------------------------------
From: <Carmods at aol.com>
Sent: Thursday, February 24, 2011 6:26 AM
To: <tigers at autox.team.net>
Subject: [Tigers] 5 speed transmission
> _allfudge1635 at gmail.com_ (mailto:allfudge1635 at gmail.com) writes:
>
> I did take a Mustang 5.0 five speed and swapped tail housings and shifter
> plate off a chevy S10 to bring the shifter forward and out of the x
> frame..
>
> Mike,
> How did you handle the speedometer drive mis match with the S-10 housing
> and the Mustang output shaft?
>
> John Logan
More information about the Tigers
mailing list